Miele DAG 500 Operating And Installation Instructions - Page 32
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DAG 500. Miele DAG 500 40 pages. Downdraft ventilation system
Print Page
Installation
Preparing the electrical connection
^ Remove the cover of the terminal
box.
^ Decide whether you would like the
power cable to enter the ventilation
system from below or from the rear.
Remove the respective knock-out.
^ If the system is connected to an
external blower, remove the
knock-out for the control cable.
^ Install a suitable UL listed cable
clamp or conduit fitting (not included)
in the knock-out.
32
^ With the assistance of at least one
other person, lift the ventilation
system into the prepared cutout. The
top mounting angles should rest on
the countertop.
^ Align the ventilation system.
^ Secure the appliance to the floor and
the countertop.
^ Remove the protective plastic from
the side cover.
^ Push the side covers in place on the
mounting brackets and engage them.