Miele DAR 1130 Operating And Installation Instructions - Page 33

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DAR 1130. Miele DAR 1130 40 pages. Range wall / insert hood
Also for Miele DAR 1130: Operating And Installation Instructions (32 pages), Operating And Installation Instructions (22 pages), Operating And Installation Instructions (40 pages)

Print Page

All electrical work must be

undertaken by a suitably qualified

and competent person in strict

accordance with current national and

local safety and building code

regulations. Installation, repairs and

other work by unqualified persons

could be dangerous, for which the

manufacturer cannot be held liable.

Ensure power is not supplied to the

appliance until after installation or

repair work has been carried out.

The rangehood must be connected to a

suitably earthed socket (AC 230 V,

50 Hz).

For extra safety it is advisable to install

a residual current device (RCD) with a

trip current of 30 mA.

Connection of this appliance must be

made via a suitable isolator switch

which provides disconnection on all

poles and which complies with national

and local safety regulations. The

isolator switch should be easily

accessible after the appliance has been

built in.

If the mains socket is not accessible

after installation, an additional means of

disconnection must be provided for all

poles. There must be an all-pole

contact gap of 3 mm in the switch

(including switch, fuses and relays).

The connection data is given on the

data plate (See "After sales service").

Ensure that this data matches the

household mains supply.

Electrical connection