Miele DDG 102 Operating And Installation Manual - Page 7

Browse online or download pdf Operating And Installation Manual for Ventilation Hood Miele DDG 102. Miele DDG 102 24 pages. External motor roof installation
Also for Miele DDG 102: Operating And Installation Instructions (28 pages), Installation Instructions Manual (28 pages), Installation Instructions Manual (28 pages)

Print Page

The external motor is connected to the

cooker hood using a special control

cable and is operated by the control

panel on the cooker hood.

Connection of this appliance and of the

cooker hood to which it is connected

must be carried out in accordance with

DIN VDE 0100, and with local and

national safety regulations.

For extra safety it is advisable to install a

residual current device (RCD) with a trip

current of 30 mA (in accordance with

DIN VDE 0664, VDE 0100 Section 739).

The voltage, rated load and fusing are

given on the data plate on the

appliance housing.

Check that these match the household

mains supply.

Electrical connection

The external motor is supplied with a

3 m long extension cable. If the

control cable needs to be extended

further, or if it is to be connected to a

fixed connection point, the

installation must be carried out in

accordance with VDE 0100 / 0700

Part 1, and with local and national

safety regulations.

Equipotential bonding must be

carried out.

There is a screw connection point on

the external motor marked with the

earth symbol -, to which the earth

lead must be attached.

This external motor has been designed

to be connected to a Miele cooker hood

only and must not be connected to a

cooker hood made by another

manufacturer.

Please also read the installation

instructions and electrical connection

pages of the instruction booklet

supplied with the cooker hood to which

the external motor is being connected.