Miele Imperial DWW 1250 EX Operating And Installation Manual - Page 23

Browse online or download pdf Operating And Installation Manual for Ventilation Hood Miele Imperial DWW 1250 EX. Miele Imperial DWW 1250 EX 40 pages.

Print Page

– Lightly secure retaining plate A into

position using two 5 x 40 mm screws

as shown and use the two notches

to align with the middle line.

– Drill 6 more ø 8 mm holes through

the now fitted retaining plate and

press S8 plugs into the holes.

– Screw four 5 x 40 mm screws into

the two upper and the two lower

holes.

– Hold retaining plate B up to the wall

and push up until directly below the

ceiling. Use the notches and the

centre line to align it horizontally.

Mark the positions for the four holes

to be drilled on the wall.

– Drill four ø 8 mm holes into the wall,

and push the S8 plugs into the holes.

– Screw on the retaining plate with four

5 x 40 mm screws.

Retaining plate C only needs to be

fitted if dimension Y is greater than 415

mm. It provides greater stability for the

extension piece.