Miele PT 5135 C EL Operating And Installation Instructions - Page 40

Browse online or download pdf Operating And Installation Instructions for Dryer Miele PT 5135 C EL. Miele PT 5135 C EL 48 pages. Condenser tumble dryer
Also for Miele PT 5135 C EL: Operating And Installation Instructions (48 pages), Installations Plan (10 pages), Installations Plan (13 pages)

Print Page

Installation and connection

Electrical connection

All electrical work should be carried out

only by a suitably qualified and

competent person, in strict accordance

with national and local safety

regulations.

Ensure power is not supplied to

the appliance while installation work

is being carried out.

The appliance is supplied with a mains

cable with moulded plug ready for

connection to a AC 230 V 60 Hz mains

supply.

The machine is not convertible.

The voltage, rated load and fuse

rating are given on the data plate.

Please ensure these match the site

mains supply.

Connection should be made via a

suitable isolator which complies with

national and local safety regulations,

and the on/off switch should be easily

accessible for servicing work.

For extra safety it is advisable to install

a residual current device (RCD), with a

trip current of 30 Ma (in accordance

with DIN VDE 0664, DIN VDE 0100

Section 739).

When switched off there must be an

all-pole contact gap of 3 mm in the

isolator switch (including switch, fuses

and relays acc. to VDE 0660.

WARNING:

THIS APPLIANCE

MUST BE EARTHED