Miele PT 7137 WP Vario Commissioning, Programme Chart And Settings - Page 26
Browse online or download pdf Commissioning, Programme Chart And Settings for Dryer Miele PT 7137 WP Vario. Miele PT 7137 WP Vario 28 pages.
Also for Miele PT 7137 WP Vario: Installations Plan (11 pages)
Print Page
Settings
Settings which can only be
changed during the
commissioning process
If you wish to change the settings after
the commissioning process, please
contact the Miele Service Department.
Payment system
A coin box needs to be fitted.
– No coin box
– Programme operation*
The tumble dryer is operated using a
coin box. The user purchases a wash
programme.
– Timed operation*
The tumble dryer is coin-operated
using a time meter. The user
purchases a time-controlled
programme.
– RS 232*
When the tumble dryer is coin-
operated, serial interface RS 232 is
activated (RS 232 module must be
fitted).
– IK6*
When the tumble dryer is coin-
operated, serial interface RS 232 for
the IK 6 is activated (IK 6 and RS 232
module must be fitted).
* Then the following settings are
offered: Coin mechanism lock, Signal to
pin 7, T-max exceeded, Duration cool
air, Cool air free, Duration hot air.
26
Coin mechanism lock
In coin operation mode, the payment
system can be set so that
programming changes can be made
within a specified time period without
losing the coins.
– Off
– Immediately after start
Cancellation and changes not
possible without loss of payment.
– 1 minute after starting (up to 5
minutes)
Cancellation and changes not
possible after this time period
without loss of payment.
Signal at pin 7
Setting the feedback signal for the
coin box.
– Programme end
A signal is sent to pin 7 on the coin
mechanism at the end of the
programme.
– Release the start button
A signal is sent to pin 7 on the coin
mechanism when the start button is
released.
– Start and programme end
A signal is sent to pin 7 on the coin
mechanism when the start button is
released and at the end of the
programme.