HP 2133 Mini-Note Basic Setup - Page 11

Browse online or download pdf Basic Setup for Desktop HP 2133 Mini-Note. HP 2133 Mini-Note 14 pages. Hp 2133 mini-note: supplementary guide
Also for HP 2133 Mini-Note: User Manual (25 pages), User Manual (20 pages), Multiboot User Manual (17 pages), Quickspecs (33 pages)

Print Page

Product Information and Troubleshooting

Troubleshooting resources

If you experience computer problems, perform these troubleshooting steps in the order

provided until the problem is resolved:

1. Refer to "Quick troubleshooting," the next section in this chapter.

2. Access Web site links and additional information about the computer through Help and

Support. Click Start, and then click Help and Support.

3. Contact technical support:

a. Open your Web browser, and then click Start.

b. Click Help and Support, and then click Contact support to start a chat session

with a support specialist.

– or –

Refer to the Worldwide Telephone Numbers booklet included with the computer to

contact technical support.

Quick troubleshooting

The computer is unable to start up

If the computer does not turn on when you press the power switch, adequate power may not

be available to the computer.

The following suggestions may help you determine why the computer will not start up:

■

If the computer is plugged into an AC outlet, plug another electrical device into the

outlet to be sure that the outlet is providing adequate power.

✎

Use only the AC adapter provided with the computer or one approved by HP for

this computer.

■

If the computer is running on battery power or is plugged into an external power source

other than an AC outlet, plug the computer into an AC outlet using the AC adapter. Be

sure that the power cord and AC adapter connections are secure.

The computer screen is blank

If the screen is blank, the computer may not be set to display the image on the computer

screen. To transfer the image to the computer screen, press fn+f4.

Software is functioning abnormally

Follow these suggestions if the software becomes unresponsive or responds abnormally:

■

Restart the computer. Click Start, click the arrow next to the Lock button, and then click

Restart.

If you cannot restart the computer using this procedure, refer to the next section, "The

computer is on but is not responding."

Getting Started