Miele T 1526 Operation Manual - Page 15

Browse online or download pdf Operation Manual for Dryer Miele T 1526. Miele T 1526 28 pages. Vented dryer
Also for Miele T 1526: Operation Manual (28 pages), Technical Information (42 pages)

Print Page

Problem solving guide

Electrical appliances should only be repaired by qualified personnel. Incor-

rectly repaired machines may put the user at risk. There are, however, minor

problems which can be corrected without contacting the Service Department.

What to do if, . . . ?

. . . the tumble dryer fails to

start when turned on?

. . . the laundry is not suffi-

ciently dry?

. . . the drying times are too

long?

. . . the "anti-crease" indicator

lamp starts flashing?

Possible Cause . . .

Check whether the "On"

indicator is lit. If so, failure to

start may be due to an incorrect

program selection procedure.

If the "On" indicator lamp does

not illuminate, check that:

The load consisted of dissimilar

items (size and fabrics).

Small loads or individual items

may cause the program to

terminate prematurely.

The lint filter is clogged.

The laundry was not spun in the

washer for a sufficient time.

Problem solving guide

Remedy . . .

Repeat the program selection

procedure in the correct

sequence, as outlined in the

"Program Selection" chapter.

– The "ON/OFF" button is

depressed.

– The door is properly closed.

– The machine is plugged in

and the fuse or circuit breaker

has not tripped.

Select a longer drying program.

Small loads can be time-dried.

Clean the lint filter in the door.

Make sure that the laundry is

thoroughly spun before drying.

– Turn the program selector

to "finish".

– Turn the machine off and

then on again.

– Select a program.

– Press the "Start" button.

If the indicator lamp starts

flashing again, this indicates a

fault in the machine.

Please contact the Miele

Service Dept.