HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Setup And Configuration Manual - Page 9

Browse online or download pdf Setup And Configuration Manual for Desktop HP 2530p - EliteBook - Core 2 Duo 2.13 GHz. HP 2530p - EliteBook - Core 2 Duo 2.13 GHz 18 pages. Notebook pc
Also for HP 2530p - EliteBook - Core 2 Duo 2.13 GHz: Specifications (36 pages), Product Manual (16 pages), User Manual (15 pages), Network Manual (16 pages), Specifications (2 pages), User Manual (27 pages), Setup Manual (19 pages), Overview (16 pages), Manuallines (12 pages), Software Installation Manual (8 pages), Manuallines (6 pages), Driver Installation (20 pages), Manual (20 pages), Manuallines (7 pages), User Manual (31 pages), User Manual (46 pages), User Manual (44 pages), User Manual (42 pages), Specifications (45 pages), User Manual (30 pages), User Manual (24 pages), Quickspecs (46 pages)

Print Page
HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Setup And Configuration Manual
Default Setting
Recommended Setting
i. Select Enabled.
d. IDE Redirection
Default Setting
Recommended Setting
i. Select Enabled.
This option enables / disables IDE Redirection (IDE-R) functionality.
24) Skip Secure Firmware Update.
This option enables / disables the ability to remotely update the ME FW.
25) Skip Set PRTC.
26) Skip Idle Timeout.
Default Setting
Recommended Setting
27) Hit Esc to return to previous menu.
28) Hit Esc to Exit
a. Select Y.
This will exit the MEBx Setup and save settings.
29) The system will display the state of Intel AMT and an Intel ME Configuration Complete
message.
30) System will continue into the OS.
After the configuration is complete, it will go from In-Setup phase to Operational phase. AMT is fully
operational. Once in the Operational phase, the system can be remotely managed through the Intel
AMT WebGUI or ISV remote console and can be provided to the end-user for regular use.
Once an AMT system is configured, it will display its status and show that the AMT tables are valid on
every boot.

Intel AMT WebGUI

The Intel AMT WebGUI is a web browser based interface for limited remote system management.
The WebGUI is often used as a test to determine if AMT Setup and Configuration was performed
properly on a system. A successful remote connection between a remote system and the host system
running the WebGUI indicates proper AMT Setup and Configuration on the remote system.
The AMT WebGUI is accessible from the following web browsers:
Microsoft Internet Explorer 6 SP1 or newer
•
Netscape Navigator 7.1 or newer
•
•
Mozilla Firefox 1.0 or newer
•
Mozilla 1.7 or newer
: Enabled
: Enabled
This option enables / disables Serial Over LAN (SOL) functionality.
: Enabled
: Enabled
: 0
: 0
9