HP 260 G2 DM Product End-Of-Life Disassembly Instructions - Page 2
Browse online or download pdf Product End-Of-Life Disassembly Instructions for Desktop HP 260 G2 DM. HP 260 G2 DM 15 pages. Desktop mini
Also for HP 260 G2 DM: Hardware Reference Manual (33 pages)
Print Page
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
T15 Electric Screwdriver
T8 Electric Screwdriver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Follow steps described in Disassembly instruction (file attached)
2.
If parts can be removed without using a tool, remove it first
3.
Use correct screwdriver and torque value before unlock the screw.
4.
Disconnect RTC battery cable and remove battery from M/B.
5.
Dispose of all removed components according to regulation requirements.
6.
7.
8.
9.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00
Template Revision B
PSG instructions for this template are available at
EL-MF877-01
0
0
0
Tool Size (if
applicable)
Page 2