Miele TOUCHTRONIC T 9822 Installation Instructions Manual - Page 14

Browse online or download pdf Installation Instructions Manual for Dryer Miele TOUCHTRONIC T 9822. Miele TOUCHTRONIC T 9822 28 pages. Miele clothes dryer user manual
Also for Miele TOUCHTRONIC T 9822: Operating Instructions Manual (36 pages), Operating Instructions Manual (36 pages)

Print Page

Gas connection

,
WARNING
Installation and service must be
performed by a qualified installer,
service agency or gas supplier.
In Massachusetts a licensed
plumber / gas fitter is required.
This appliance must be installed
with its own shut off valve in the
same room. The valve must be
easily accessible to the consumer to
turn on or shut off the gas supply
after the appliance is installed.
During any pressure testing of the
gas system this appliance must be
disconnected from the gas supply
by closing its individual manual shut
off valve.
Any pipe connections must be made
using a thread sealant approved for
gas connections. Failure to correctly
install these items could lead to a
gas leak and subsequent explosion.
The gas installation must be made in
accordance with local codes or, in
the absence of local codes, with
-
National Fuel Gas Code,
ANSI Z223.1/NFPA 54 for USA
or
-
Natural Gas and Propane
Installation Code,
CSA B149.1 for Canada.
14
Gas type
The gas dryer is equipped for
connection to a NATURAL GAS
supply.
The maximum heat output is
19,500 BTU/H (5,7 kW).
Minimum gas supply pressure
to obtain the required gas input is:
0.15 psi (4" WC) for natural gas
0.29 psi (8" WC) for LP gas.
Maximum gas supply pressure
before the gas pressure regulator
0.37 psi (10" WC) for natural gas
0.46 psi (13" WC) for LP gas.