HP 8710w - HP Mobile Workstation Security Manual - Page 19

Browse online or download pdf Security Manual for Desktop HP 8710w - HP Mobile Workstation. HP 8710w - HP Mobile Workstation 35 pages. Mobile workstation
Also for HP 8710w - HP Mobile Workstation: Quickspecs (39 pages), User Manual (15 pages), User Manual (20 pages), Multiboot User Manual (17 pages), Software Update (12 pages), User Manual (17 pages), User Manual (20 pages), Network Manual (16 pages), User Manual (34 pages), Installation Manual (6 pages), Quickspecs (46 pages), Quickspecs (32 pages)

Print Page
HP 8710w - HP Mobile Workstation Security Manual

Setting a DriveLock password

To access the DriveLock settings in Computer Setup, follow these steps:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select Security > DriveLock passwords, and then press enter.
3.
Select the location of the hard drive you want to protect, and then press f10.
4.
Use the arrow keys to select Enable in the Protection field, and then press f10.
5.
Read the warning. To continue, press f10.
6.
Type your user password in the New password and Verify new password fields, and then press
f10.
7.
Type your master password in the New password and Verify new password fields, and then
press f10.
8.
To confirm DriveLock protection on the drive you have selected, type DriveLock in the
confirmation field, and then press f10.
9.
To exit DriveLock settings, use the arrow keys to select Esc.
10.
To save your preferences, use the arrow keys to select File > Save changes and exit. Then follow
the instructions on the screen.
Your preferences go into effect when the computer restarts.
Using Computer Setup DriveLock
f10
while the
13