Miele HS11 Operating Instructions Manual - Page 14
Browse online or download pdf Operating Instructions Manual for Vacuum Cleaner Miele HS11. Miele HS11 21 pages.
Also for Miele HS11: Operating Instructions Manual (32 pages)
![Miele HS11 Operating Instructions Manual](/uploads/products/server2/3436150/3436150.jpg)
,
When vacuuming fine dust, e.g.
sawdust, sand, plaster, flour, talcum
powder etc., electrostatic charges
build up naturally. Under certain
conditions these charges will be
released. To avoid the unpleasant
effects of these discharges, a metal
inlay has been incorporated into the
underside of the handle. Please
make sure that you keep your hand
in constant contact with this metal
strip during vacuuming.
Setting down, transportation
and storage
Park system for pauses in
vacuuming (dia. 25)
The Park system allows you to
conveniently park the suction tube and
floorhead during pauses.
^ Slot the floorhead into the parking
attachment at the back of the
vacuum cleaner.
If your vacuum cleaner is on a
sloping surface, e.g. a ramp, retract
the telescopic tube fully.
Park system for storage (dia. 26)
,
Always disconnect the vacuum
cleaner from the electrical supply
when you have finished using it.
Switch it off at the wall socket and
unplug it.
^ Stand the vacuum cleaner upright.
Retract the telescopic tubes fully so
that the vacuum cleaner takes up
less room for storage.
^ Slot the floorhead downwards into
one of the parking attachments on
the sides of the vacuum cleaner.
This makes the vacuum cleaner easier
to carry or store.
Maintenance
,
Always disconnect the vacuum
cleaner from the electrical supply for
maintenance work and for cleaning.
Switch off at the wall socket and
unplug it.
The Miele filtration system consists of
three filters.
– Dustbag
– Dust compartment filter (for motor
protection)
– Exhaust filter
These will need to be replaced from
time to time to ensure that your vacuum
cleaner performs efficiently.
Only use genuine dustbags, filters
and accessories with the "Original
Miele" logo on them. This will ensure
that the suction power of the
vacuum cleaner is maintained,
giving the best possible cleaning
results.
en
35