Miele S 2120 Technical Information - Page 33
Browse online or download pdf Technical Information for Vacuum Cleaner Miele S 2120. Miele S 2120 34 pages. Vacuum cleaners
Also for Miele S 2120: Brochure (12 pages), Operating Instructions Manual (24 pages)
S2 Canister Vacuums
Note:
The motor protection filter should always be changed when a new pack of
Miele vacuum bags is opened. A motor protection filter is supplied with every
pack of Miele vacuum bags.
Cause:
Exhaust filter clogged.
Remedy:
Replace the exhaust filter.
Note:
1. Super Air Clean
This exhaust filter should always be changed when a new pack of Miele
vacuum bags is opened. A Super Air Clean exhaust filter is supplied with
every pack of Miele vacuum bags.
2. Active Air Clean - Active HEPA
This exhaust filter must be changed after approximately 1 year. The date
can be written on the filter.
4
Service
4.1
Telescopic Suction Hose Locking Piece Replacement
1. Release the old locking piece with a small flathead screwdriver.
2. Remove the cap (Figure 040-2, Item A). The pushbutton and spring
underneath will be released as well.
3.
The insert (Figure 040-2, Item B) will also come out when the locking
piece is removed.
Figure 040-2: Telescopic Locking Piece
Note:
When re-installing, carry out the following in the given order:
1. Install the pushbutton, Figure 040-2, Item A.
2. Press and hold the pushbutton while sliding the insert (Figure 040-2, Item
B) into the suction hose.
The insert can be replaced separately, if needed.
33
Technical Information