Miele S 560 series Operating Instructions Manual - Page 25
Browse online or download pdf Operating Instructions Manual for Vacuum Cleaner Miele S 560 series. Miele S 560 series 44 pages.
Also for Miele S 560 series: Operating Instructions Manual (44 pages), Operating Instructions Manual (44 pages)
Print Page
When to change the dustbag
Change the dustbag when the colour
marker in the dustbag change indicator
fills the display.
Dustbags are designed for single
use only. Do not attempt to re-use
them as suction would be reduced.
Checking the dustbag change indica-
tor
^ Attach the standard floorhead to the
suction tube. Do not use any of the
other floorheads or attachments as
they will cause the dustbag change
indicator to give a false reading.
^ Switch the vacuum cleaner on and
turn the rotary selector (if applicable)
to the highest power setting.
^ Lift the floorhead off the floor a little. If
the red marker completely fills the
dustbag change indicator you should
replace the dustbag with a new one.
Maintenance and care
How the dustbag change indicator
works
The indicator is designed to measure
the air permeability of a dustbag con-
taining common household dust. Nor-
mal household dust would contain a
mixture of dust, hair, carpet fluff,
threads, grit etc.
However, if the vacuum cleaner has
been used to suck up fine dust, such
as plaster, brick dust, cement or flour,
the pores of the dustbag become
blocked very quickly. This affects the
air permeability of the bag and the
marker will indicate that the bag is "full"
even when it is not. If this happens you
must still change the dustbag because
suction power will be greatly reduced
by blocked pores in the dustbag.
If, on the other hand, you have vacu-
umed up a lot of hair and carpet fluff
which typically contains a lot of air the
indicator may fail to react even though
the bag is full. You should still change
it!
Both these extremes can occur.
25