ALLMOVE X10 Pro User Manual - Page 10

Browse online or download pdf User Manual for Scooter ALLMOVE X10 Pro. ALLMOVE X10 Pro 14 pages.

Print Page

Cruise Control

Quickly press the power button 4 times to turn on the cruise control, then press the

throttle to the end for about 6S, you will hear a beep indicating that the scooter is in

cruise control, release the throttle and the scooter will go by itself.

Push the throttle down once or squeeze the brake handle to cancel the cruise control.

The X10Pro can travel up to 24-28 miles on a fully charged battery under ideal riding

conditions. The following are some of the major factors that will affect the operating

range of your device:

Terrain: Operating Range is highest when riding on a smooth, flat surface. Riding uphill

and/or on rough terrain will reduce operating range significantly

Weight: A lighter user will have higher operating range than a heavier user.

Ambient temperature: Please ride and store the E-Scooter in recommended tempera-

tures. This will increase the operating range, battery life, and overall performance of your

device.

Speed and Riding Style: Maintaining a moderate and consistent speed while riding

produces maximum operating range. Traveling at high speeds for extended periods of

time, frequent starts and stops, and idiling will decrease operating range.

CAUTION

Speed and weight limits are set for your own safety. Please do not exceed the limits

listed in the "SPECIFICATIONS" section of this manual.

ALLMOVE X10 Pro APP

Scan the QR code below or download the "Tuya

Smart" app from the App store.

• Power on your scooter, open the app and select"sign up" or "log in".

• Complete any updates that are prompted.

• Click the button on the top right corner(+)to add device

• Click Add Manually at the top of the screen

• Select the"Accesslocation" and "Enable Bluetooth", and then click"Auto Scan"

• After searching,an available device that can be connected appears, click "Next"

• As shown in the picture, the status is"connecting". Once the connection is estab-

lished, it will automatically add the device to the home page. Subsequently, the next time

you open the app, you can directly select the device.

• Lastly,click"done"to complete.

DISCONNECT THE EQUIPMENT

· Select the icon"

"on the top right corner of the app product screen.

· Select"Remove Device" button at the bottom.

· Lastly,"Disconnect and wipe data"to remove device from the app product panel.