Miele Triflex HX2 Operating Instructions Manual - Page 28
Browse online or download pdf Operating Instructions Manual for Vacuum Cleaner Miele Triflex HX2. Miele Triflex HX2 44 pages. Cordless vacuum cleaner
Also for Miele Triflex HX2: Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages)
Print Page
Use
Switching on and off
If you have charged the battery in the
wall bracket, take the vacuum cleaner
out of the wall bracket.
If you have charged the battery dir-
ectly, unplug the charger from the
charging socket on the bottom of the
battery.
For the best possible cleaning results,
always activate the ComfortClean
function before switching on the va-
cuum cleaner (see "Maintenance – Ac-
tivating the ComfortClean function").
Press the On/Off switch on the Com-
fort handle .
Selecting the suction power
level
The suction power level can be adjus-
ted for the specific situation. Reducing
the suction power reduces the amount
of effort required to manoeuvre the
Electrobrush.
There are 3 power levels to choose from
on the Comfort handle:
28
Min.
Lowest power level for light
soiling
Eco
Medium power level for nor-
mal soiling
Max.
Highest power level for
heavy soiling
The floor covering detection function is
activated at every power level.
The Electrobrush power consumption is
automatically set to the optimum level
based on the type of flooring – this can
lead to a change in the operating noise.
Carpet protective function
When the vacuum is at a standstill, the
power of the Electrobrush is reduced
automatically after a few seconds, to
protect the floor surface.
Self-standing function for short
pauses in vacuuming
(For safety reasons, this function can
only be used when the PowerUnit is fit-
ted at the bottom of the vacuum
cleaner)
If you are vacuuming with the
PowerUnit fitted at the bottom of the
vacuum cleaner, you can easily inter-
rupt operation while the appliance is
switched on.
Swing the vacuum cleaner forwards
until the Electrobrush connector aud-
ibly clicks into place.
The vacuum cleaner stays securely up-
right, the Electrobrush switches itself off
and the battery is conserved.
If you then unlock the connector on the
Electrobrush, the Electrobrush will
switch on again.