Miele TX2070 Operating And Installation Instructions - Page 38
Browse online or download pdf Operating And Installation Instructions for Vacuum Cleaner Miele TX2070. Miele TX2070 44 pages.
Electrical connection
All electrical work should be under-
taken by a suitably qualified and
competent person in strict accord-
ance with current national and local
safety regulations (BS 7671 in the
UK).
Installation, repairs and other work
by unqualified persons could be dan-
gerous, for which the manufacturer
cannot be held liable.
Ensure power is not supplied to the
appliance until after installation or re-
pair work has been carried out.
Do not connect the appliance to the
mains electricity supply by an exten-
sion lead. These do not guarantee
the required safety of the appliance.
The connection data is given on the
data plate. This is visible when the
grease filters have been removed. En-
sure that this data matches the house-
hold mains supply.
Connection of this appliance should be
made via a suitable isolator or a double
pole fused spur connection unit which
complies with national and local safety
regulations and the On-Off switch
should be easily accessible after the
appliance has been built in. When
switched off there must be an all-pole
contact gap of 3 mm in the switch (in-
cluding switch, fuses and relays ac-
cording to EN 60335).
38
If the switch is not accessible after in-
stallation (depending on country), an
additional means of disconnection must
be provided for all poles.
For extra safety it is advisable to protect
the appliance with a suitable residual
current device (RCD). Contact a quali-
fied electrician for advice.
Important
This appliance is supplied for connec-
tion to an a.c. 230 V single phase 50 Hz
supply. The wires in the mains lead are
coloured in accordance with the follow-
ing code:
Green/yellow .................................earth
Blue ............................................. neutral
Brown ................................................live
WARNING:
THIS APPLIANCE MUST BE
EARTHED