ALLN-1 2k20 Mini Edt. Assembly Instructions Manual - Page 4
Browse online or download pdf Assembly Instructions Manual for Fitness Equipment ALLN-1 2k20 Mini Edt.. ALLN-1 2k20 Mini Edt. 10 pages.
Print Page
STEP 4: ATTACHING THE VERTICLE SUPPORT BARS
1.
Attach the 7" Perf Tubes to the 17" Perf. Tubes (from Step1) and
the 30" Perf. Tubes (from Step1)
2.
Attach at the 10
th
(from the back) one the 17" Perf. Tubes and the
10
th
hole (from the bottom) on the 30" Perf. Tube
3.
Repeat for both sides.
This is also shown in the online video.
STEP 5: ATTACHING THE HORIZONTAL RUNNER BARS
1.
After sliding the two sleeves on to a Horizontal Runner Bar, insert
the Horizontal Runner Bar into the 17" Perf. Tubing.
2.
Use a male and female knob to secure the two pieces together.
3.
Insert the female knob through the first hole of the 17" Perf.
Tubing and the second hole on the Horizontal Runner Bar
4.
Repeat for both sides.
This is also shown in the online video.
STEP 6: ATTACHING THE VERTICLE RUNNER (Long)
1.
Locate the second set of 17" Perf. Tubes, and attach 2 Hex Plates
to the bottom 2 bottoms holes of a 17" Perf. Tube.