Miele K 11820 SD Operating And Installation Instructions - Page 26

Browse online or download pdf Operating And Installation Instructions for Refrigerator Miele K 11820 SD. Miele K 11820 SD 44 pages. Refrigerator with dynamiccooling
Also for Miele K 11820 SD: Operating And Installation Manual (48 pages), Operating And Installation Instructions (48 pages)

Miele K 11820 SD Operating And Installation Instructions

Problem solving guide

Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in strict accordance with
current local and national safety
regulations. Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
unauthorised work.
What to do if . . .
. . . the appliance does not get cool.
^ Check whether the appliance has
been switched on. The temperature
display must be lit up.
^ Check that the plug is correctly
inserted into the socket and switched
on.
^ Check that the fuse is not defective
and that the mains fuse has not
tripped. If it has, contact Miele.
. . . the temperature in the refrigerator
is too low.
^ Set the required temperature.
^ The SuperCool function is still
switched on. SuperCool switches
itself off after 6 hours.
26
. . . the compressor is switching in
too frequently and for too long.
^ Check whether the ventilation gaps
have been covered over or become
dusty.
^ Check whether the metal grille (heat
exchanger) at the back of the
appliance has become too dusty.
^ The appliance door is being opened
frequently.
^ Check that the door has been closed
properly.
. . . the interior lighting in the
refrigerator section is not working.
^ Is the temperature display lit up?
If it is, the lamp is defective:
^ Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket, or
disconnect the mains fuse or remove
the screw-out fuse in countries where
this is applicable.
^ Grip the lamp cover a at the front
and unhook it at the back.