Miele K 122 Ui -1 Operating And Installation Instructions - Page 24
Browse online or download pdf Operating And Installation Instructions for Refrigerator Miele K 122 Ui -1. Miele K 122 Ui -1 40 pages. Built-in refrigerator
Print Page
Cleaning and care
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids, chlorides
or chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
Make sure that water cannot get into
the temperature selector or into the
light.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
Before cleaning
^ Switch the appliance off by turning
the temperature selector to "0" and
then switching off at the socket and
removing the plug.
^ Take any food out of the appliance
and store it in a cool place.
^ Defrost the freezer compartment.
^ Take out any removable parts, e.g.
shelves, for cleaning.
24
Cleaning the interior and
accessories
Use lukewarm water with a little
washing-up liquid. Accessories and
shelves should all be handwashed only.
^ Clean the refrigerator section at least
once a month and the freezer
compartment each time it is
defrosted.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^ After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth. Leave the doors
open to air the appliance for a short
while.
Ventilation gaps
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build up
of dust will increase the appliance's
energy consumption.
Door seal
Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
The door seals should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.