Miele K 12820 SD ed Operating And Installation Manual - Page 23
Browse online or download pdf Operating And Installation Manual for Refrigerator Miele K 12820 SD ed. Miele K 12820 SD ed 40 pages. With dynamic cooling
Print Page^ A range of Miele cleaning and
conditioning agents is available from
the Miele UK Spare Parts
Department, or via the internet at
www.miele-shop.com.
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
For stainless steel surfaces, use a
suitable stainless steel conditioning
agent.
Make sure that no water can
penetrate into the electronic unit or
into the light.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed.
It contains information which is
required in the event of a service call.
Cleaning and care
Before cleaning
^ Switch the appliance off, switch off at
the socket and withdraw the plug.
^ Take any food out of the appliance
and store it in a cool place.
^ Take out any removable parts, e.g.
shelves, for cleaning.
Cleaning the outer casing, the
interior and accessories
^ Clean the appliance at least once a
month using warm water and a little
washing-up liquid.
^ Accessories and shelves should all
be hand-washed only.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^ After cleaning, wipe the outer casing,
the interior and accessories with a
damp cloth and dry with a soft cloth.
Leave the door open to air the
appliance for a short while.
^ Stainless steel surfaces can be
cleaned with a proprietary stainless
steel cleaning agent, following the
manufacturer's instructions on the
packaging.
^ After cleaning, stainless steel
surfaces should be treated with a
conditioning agent for stainless steel.
23