Miele K 12820 SD edt/cs Operating And Installation Instructions - Page 36
Browse online or download pdf Operating And Installation Instructions for Refrigerator Miele K 12820 SD edt/cs. Miele K 12820 SD edt/cs 48 pages. Refrigerator with dynamiccooling
Also for Miele K 12820 SD edt/cs: Operating And Installation Instructions (44 pages)
Print Page
Installation
Climate range
The appliance is designed for use within
certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range of
the appliance is stated on the data plate
inside the appliance.
Climate range
SN
N
ST
T
Operating in a room which is too cold
will result in the compressor switching
off for too long, causing the internal
temperature in the appliance to rise with
the risk of food deteriorating and going
off.
Ventilation
Air at the back of the appliance gets
warm. To ensure sufficient ventilation,
the ventilation gaps must not be
covered. They should also be dusted on
a regular basis.
Installation
^ Remove the cable clip from the back
of the appliance.
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
^ Carefully push the appliance into
position.
^ Place the appliance with its back
against the wall.
36
Ambient room
temperature
+10 °C to +32 °C
+16 °C to +32 °C
+16 °C to +38 °C
+16 °C to +43 °C
Aligning the appliance
^ Align the front feet using the flat
spanner supplied.
Supporting the appliance door
^ The foot a should definitely be
unscrewed until it rests on the floor.
Then turn it a further 90°.