Miele CS 1223 Operating And Installation Instructions - Page 23
Browse online or download pdf Operating And Installation Instructions for Cooktop Miele CS 1223. Miele CS 1223 44 pages. Induction wok
Also for Miele CS 1223: Operating And Installation Instructions (40 pages), Operating And Installation Instruction (48 pages), Operating And Installation Instructions (44 pages), Operating And Installation Instructions (40 pages)
Print Page
Ceramic surface
Remove light soiling with a damp cloth.
Then clean the appliance with a
suitable ceramic and stainless steel
hob cleaner (see "Optional
accessories") applied with kitchen
paper or a clean cloth. Do not apply
cleaner whilst the appliance is still hot,
as this could result in marking. Please
follow the manufacturer's instructions.
Finally, wipe the appliance with a damp
cloth, then polish with a soft, dry cloth.
Ensure that all cleaner residues are
removed. Residues can burn onto the
appliance the next time it is used, and
cause damage to the ceramic surface.
Spots caused by limescale, water and
aluminium residues (spots with a
metalic appearance) can be removed
using the ceramic and stainless steel
hob cleaner.
Should any sugar, plastic or
aluminium foil spill or fall onto the hot
appliance while it is in use, first switch
off the appliance. Then immediately,
while the surface is still hot, use a
shielded scraper blade to scrape off
the sugar, plastic or aluminium foil,
taking care not to burn yourself.
Allow the appliance to cool down, and
then clean as described above with a
suitable proprietary ceramic and
stainless steel hob cleaner.
Cleaning and care
Stainless steel
The ceramic and stainless steel hob
cleaner can be used to clean the frame
when required (see "Optional
accessories"). Apply with an even
pressure following the direction of the
"grain".
To help prevent re-soiling, a proprietary
conditioning agent for stainless steel is
recommended (see "Optional
accessories").
Apply sparingly with a soft cloth.
Do not use stainless steel cleaning
agents on printed surfaces. This
would rub off the print. These areas
should be only cleaned with an
E-Cloth or with a solution of warm
water and a little washing-up liquid
applied with a soft sponge.
23