Miele GAS COMBISET CS 1011 Converting Instructions - Page 6
Browse online or download pdf Converting Instructions for Cooktop Miele GAS COMBISET CS 1011. Miele GAS COMBISET CS 1011 40 pages. Gas combiset
Also for Miele GAS COMBISET CS 1011: Operating And Installation Instructions (44 pages), Operating And Installation Instructions (48 pages), Operating And Installation Instructions (48 pages)
Print Page
Converting CS 1011
Changing the small burner jet
a, c Fittings
b
Connector
d
Small burner jet
e
Air sleeve
f
Air vent
6
^ First loosen the fitting, c, using an
8 mm wrench. While doing so hold
the connector, b, with a 12 mm
wrench to prevent the tubing from
twisting.
^ Then remove the connector, b, from
the fitting, a, using two 12 mm
wrenches.
^ Remove the jet, d, and replace it
with the new jet.
^ Slide the air sleeve, e, until there is a
1
/
" (2 mm) gap between the sleeve
16
and the air vent, f, as shown.
Reassemble the burners and test the
unit for leaks. The cooktop can be
operated without the cooktop surface in
place by igniting the flames with a
match.