Miele KM 370 G Operating Instructions Manual - Page 11
Browse online or download pdf Operating Instructions Manual for Cooktop Miele KM 370 G. Miele KM 370 G 40 pages. Gas
Also for Miele KM 370 G: Operating Instructions Manual (32 pages), Installation Instructions Manual (32 pages), Operating Instructions Manual (28 pages), Operating Instructions Manual (28 pages)
Print Page
When the appliance is switched on either deliberately or by
mistake, or when there is residual heat present, there is the risk of
any metal items placed on the cooktop (e.g. cutlery) heating up.
Depending on the material, other items left on the appliance could
also melt or catch fire. Do not use the appliance as a resting place
for anything else.
You could burn yourself on the hot appliance. Protect your hands
with heat-resistant pot holders or gloves when handling hot pots and
pans. Do not let them get wet or damp, as this causes heat to
transfer through the material more quickly with the risk of scalding or
burning yourself on steam. Be sure to keep all textiles away from the
gas flames. Do not use oversized cloths, tea towels or other similar
materials.
When using an electrical appliance, e.g. a hand-held food mixer,
near the cooktop, ensure that the cable of the electrical appliance
cannot come into contact with the hot cooktop. The insulation on the
cable could become damaged.
Plastic and aluminium foil containers melt at high temperatures.
Do not use plastic or aluminium foil containers on the cooktop.
When a control knob is pressed down, a spark is generated on the
ignitor of all burners. Do not press down any control knobs while you
are cleaning or touching the cooktop or a burner in the vicinity of an
ignitor.
If a rangehood is installed above the cooktop, ensure that the
burners are always covered with a pan when in use. Otherwise
flames could reach the rangehood, parts of which could then be
damaged or even set on fire.
Switch the burner off when a pan is removed, even for a short
time.
Make sure all the components of the gas burner have been
correctly assembled before switching on.
Warning and Safety instructions
11