Miele KM 404 Installation Instructions Manual - Page 20

Browse online or download pdf Installation Instructions Manual for Cooktop Miele KM 404. Miele KM 404 40 pages. Gas cooktop
Also for Miele KM 404: Operating Instructions Manual (20 pages), Dimension Manual (1 pages), Installation Instructions Manual (20 pages), Installation Instructions Manual (40 pages), Operating Instructions Manual (20 pages), Installation Instructions Manual (28 pages), Installation Instructions Manual (20 pages), Operating Instructions Manual (20 pages)

Print Page
Miele KM 404 Installation Instructions Manual
Installation KM 414 / KM 417

Fixing the support brackets

^ Position the two support brackets
supplied a in the positions shown in
"Fitting the spacer bars and support
brackets" so they are flush with the
top edge of the cut-out and secure
using the 3.5 x 25 mm screws
supplied. 2 screws are needed to
secure each support bracket.
The thickness of the worktop will
determine which drill hole is used.
20

Granite worktops

On a granite worktop a hole must be
drilled d at the position indicated to
secure each support bracket.
^ Using a piece of strong, double-
sided adhesive tape position the
support brackets supplied a at the
positions indicated flush with the top
edge of the worktop and secure each
bracket with one screw in hole d as
shown.

Building in the gas hob

^ Lay the gas hob in the prepared
cut-out.
^ Draw the electricity connection cable
through the cut-out and connect.
^ Make the gas connection (see
chapter "gas connection").
^ Secure the gas hob from below
through the middle elongated hole b
in each support bracket using the
four screws supplied. Carefully adjust
the hob if necessary.