Allnet ALL168207 Quick Setup Manual - Page 6

Browse online or download pdf Quick Setup Manual for Adapter Allnet ALL168207. Allnet ALL168207 12 pages. Coaxial network adapter

Print Page
ALL168207 Coaxial Network Adapter
As wireless AP (Access Point) Extender via coaxial cable
Connect the Coaxial Ethernet Bridge to the AP:
Plug the provided Ethernet cable into the RJ45 connector of the Coaxial Ethernet Bridge and plug the
other end of the cable into the Ethernet port on the wireless AP.
Use the coaxial cable to connect the Coaxial Ethernet Bridge's F Connector and a coax jack on the
wall.
Connect the power cord to Coaxial Ethernet Bridge and plug the power cord to outlet.
The Power LED indicator will light on after plugged to outlet.
To set up your coax network
If you would like to use the existing coaxial cable in your home to set up the coax network, you can follow up the
below procedure.
1.
If you want to share the same coaxial cable for TV and coax network, please find a Coax Splitter to
deliver the signal to TV and PC. If you don't need to connect to TV, please connect to PC via the Coaxial
Ethernet Bridge directly. You won't need the Coax Splitter.
© 2008. All rights reserved.
Coaxial Ethernet
Bridge
To Power outlet
TV
Ethernet cable
PC
Coax jack on the wall
Coax Splitter
Wireless AP
The signal from the
same coaxial cable
Page 6