360VRFit M2ME IoT Sensor Instruction Manual

Browse online or download pdf Instruction Manual for Fitness Electronics 360VRFit M2ME IoT Sensor. 360VRFit M2ME IoT Sensor 2 pages.

Print Page
Specification
M2ME IoT Sensor
Model
M2ME IoT Sensor
Size
46(W) X 38(L) X 12(H)
Measurable count rate
30~180 times per minute
Type of measurement
Rotation & Linear movement
Bluetooth version
BLE 4.2
Battery capacity
388mAh
Use time
70 hours (Waiting time: 3 months)
Charging method
USB Micro 5 pin
Android 7.0 or higher(Built in Gyro sensor).
Recommended smartphone
Some apps support iOS.
BLE Communication distance
Problem-solving
If the message "Unregistered IoT Sensor" appears,
It is a device that has not been registered at the factory.
Please contact us by email at '[email protected]'
If the sensor is not detected in an app,
Press the button on the device and check whether the LED
is turned on (whether the device is powered on),
whether it is being used by another smartphone, or check the
battery level of the device.
When the measurement is not working properly
1. Make sure the device is properly attached to the correct
position.
2. Turn the device power off and on.
3. Press the button to check if the device is turned on
4. Proceed with device calibration.
5. Enter the application setting menu, change the
measurement type, and find and select the
appropriate measurement type.
1~2 errors may occur at the start and end of the exercise.
~7M
4th Jagok-ro 7Gil Gangnam-gu, Seoul, 06372,
Room #206, (Asia ICT Tower),
Republic of Korea
360VRFit.com
IoT Sensor Instruction Manual