Bürkert 8020 Operating Instructions Manual - Page 2

Browse online or download pdf Operating Instructions Manual for Measuring Instruments Bürkert 8020. Bürkert 8020 10 pages. Flowmeter with paddle wheel

Print Page

CAUTION

Warns against a possible risk.

▶ Failure to observe this warning can result in substantial

or minor injuries.

NOTE

Warns against material damage.

▶ Failure to observe this warning may result in damage

to the device or system.

Indicates additional information, advice or

important recommendations.

refers to information contained in this manual or in

BASIC SAFETY INFORMATION

This safety information does not take into account:

• any contingencies or occurences that may arise during

installation, use and maintenance of the devices.

• the local safety regulations for which the operating company

is responsible including the staff in charge of installation

and maintenance.

Danger due to high pressure in the installation.

Danger due to electrical voltage.

Danger due to high temperatures of the fluid.

Danger due to the nature of the fluid.

Various dangerous situations

▶ Prevent any unintentional power supply switch-on.

▶ Ensure that installation and maintenance work are car-

ried out by qualified, authorised personnel in posses-

sion of the appropriate tools.

English

INTENDED USE

Use of the device that does not comply with the

instructions could present risks to people, nearby

installations and the environment.

The flowmeter type 8020 is exclusively intended to

measure the flow rate of neutral or slightly aggressive

liquids free of solid particles.

▶ This device must be protected against electromagnetic

interference, ultraviolet rays and, when installed outdoors,

the effects of climatic conditions.

▶ This device must be used in compliance with the charac-

teristics and commissioning and use conditions specified

in the contractual documents and in the user manual.

▶ Requirements for the safe and proper operation of the

device are proper transport, storage and installation, as

well as careful operation and maintenance.

▶ Only use the device as intended.

Various dangerous situations

▶ Guarantee a set or controlled restarting of the process,

after a power supply interruption.

▶ Use the device only if in perfect working order and in

compliance with the instructions provided in the operat-

ing instructions.

▶ Observe the general technical rules when installing and

using the device.

▶ Do not use this device in explosive atmospheres.

▶ Do not use fluid that is incompatible with the materials

the device is made of.

▶ Do not use this device in an environment incompatible

with the materials it is made of.

▶ Do not subject the device to mechanical loads.

▶ Do not make any modifications to the device.

English