ALLNIC AUDIO 25th Anniversary T-2000 Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Amplifier ALLNIC AUDIO 25th Anniversary T-2000. ALLNIC AUDIO 25th Anniversary T-2000 16 pages. Stereo integrated amplifier

Print Page

ALLNIC AUDIO 25th Anniversary T-2000 Owner's Manual

SAFETY

• Remove ALL protective cushioning material (cardboard around tubes) inside the tube

chimneys before operation. The tube chimneys should contain NOTHING except the tubes.

• Disconnect the power cord by pulling the plug, not the cable.

• Do not attempt any repairs. Do not remove the unit's chassis cover without specific

authorization from your Allnic Audio dealer.

• Keep the power cord away from heat sources.

• Keep the unit away from liquids – do not allow any liquid to enter the interior of the unit.

• When the unit is moved from a cold to a warm environment, allow sufficient time for any

condensation to evaporate before plugging the T-2000 25

• Do not attempt any repairs.

• See the notes on "Location, Location, Location".

CLEANING

Chassis and glass/plastic

Use only a soft, lint-free cloth, dampened slightly with water only (NO cleaning fluids!), to clean the

faceplate, chassis and tube chimneys of the T-2000 25

Connectors

You may use any good quality contact cleaner recommended for such applications to clean the contacts

from time to time, as you deem appropriate.

INITIAL SET-UP

LOCATION, LOCATION, LOCATION

Like all audio products using tubes, the Allnic Audio T-2000 25

stand in a location that provides good air circulation around, above and below the stereo amplifier.

• DO NOT cover the top of the T-2000 25

• DO NOT place the unit on carpet or foam.

• DO NOT subject the unit to knocks and shocks as you move it around. This advice is meant

particularly for those who may want to place the T-2000 25

market isolation feet or similar devices. Dropping one side of the T-2000 25

whole of the unit, is not a good thing to do.

• DO NOT place the unit near a strong light or heat source.

• DO NOT place anything heavy on the unit.

• DO NOT allow rubber or vinyl materials to rest on the chassis for long periods of time. This could

discolour the metal.

• DO place the unit on a shelf or stand that is stable and not subject to vibration or sudden shock.

Anniversary into an AC connection.

Anniversary.

Anniversary needs to be placed on a solid

Anniversary.

Anniversary on some kind of after-

Anniversary, or the