ALLNIC AUDIO H-6500 Owner's Manual - Page 6
Browse online or download pdf Owner's Manual for Amplifier ALLNIC AUDIO H-6500. ALLNIC AUDIO H-6500 16 pages. Phono-stage preamplifier
Print Page
WHAT'S IN THE BOX?
Please check that the shipping box contains the following:
One (1) Allnic H-6500 phono-stage – in natural aluminum or black, depending on
•
your order specification
One (1) Power Supply for the H-6500 in natural aluminum or black, depending
•
on your order specification
One (1) power umbilical cord
•
One (1) IEC type power cord
•
One (1) Owner's Manual
•
Note:
The H-6500 and its power supply ship with the tubes installed.
1)
The H-6500 power supply will work with most IEC type aftermarket power cords.
2)
Allnic's ZL Technology cables will function synergistically with the H-6500. Of
course, only you can determine the power cord that works most synergistically
with the H-6500 in your system.
Be sure the H-6500 power supply unit is labeled for the AC voltage of your
3)
location. If it is not, please contact your Allnic Audio dealer.
We advise that you keep the boxes and other packing materials that your H-6500 came
in. It will be useful if you sell your H-6500 or in the unlikely event you need to ship it or
the power supply for service.
SAFETY
Disconnect the power cord by pulling the plug, not the cable.
•
Do not attempt any repairs. Do not remove the units' chassis covers without specific
•
authorization from Allnic Audio.
Keep the power cords away from heat sources.
•
Keep the units away from liquids – do not allow any liquid to enter the interior of the
•
units.
When the units are moved from a cold to a warm environment, allow sufficient time
•
for any condensation to evaporate in both units before plugging the power supply
unit into an AC connection.
Do not attempt any repairs.
•
Do not remove the units' chassis covers without specific authorization from Allnic
•
Audio.
See the notes on "Location, Location, Location".
•
6