ALLNIC AUDIO D-10000 Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Media Converter ALLNIC AUDIO D-10000. ALLNIC AUDIO D-10000 16 pages. Digital to analog converter

Print Page

Data under-run or over-run and, therefore, distortion can occur when a source's word clock and a

DAC's internal word clock are not synchronized absolutely. When an external clock is used, potential

errors caused by data under-run or over-run inside a DAC can be eliminated. The D-10000 OTL/OCL

provides connections for an external word clock. In addition, it is planned to update the D-10000

OTL/OCL's current high-end internal word clock implementation to an even more highly advanced

mode in the next update phase, currently planned for within a few months of initial release of the D-

10000 OTL/OCL DAC.

It is also intended to provide an I2S input in the near future. This separate system will be connected

to the D-10000 OTL/OCL DAC by a proprietary method through the AES port. The I2S system will

provide not only PCM but also DSD and have the capability to support extreme up-sampling and cross

conversion between DSD and PCM. Details will be published at a future date.

_______________________________

WHAT IS IN THE BOX?

Please check that the shipping box contains the following:

One (1) Allnic D-10000 OTL/OCL DAC – in natural aluminum or black, depending on your

•

order specification

One (1) Apple remote control

•

One (1) Owner's Manual

•

Note:

The D-10000 OTL/OCL DAC ships with the tubes installed.

The D-10000 OTL/OCL will work with most IEC type aftermarket power cords. Of course, only

you can determine the power cord that works most synergistically with the D-10000 OTL/OCL

in your system.

Be sure the D-10000 OTL/OCL DAC is labeled for the AC voltage of your location. If it is not,

please contact Audiomentors.

We advise that you keep the box and other packing materials that your D-10000 OTL/OCL DAC

came in. They will be useful if you sell your D-10000 OTL/OCL, or in the unlikely event you need to

ship the unit for service.