Dial2Open GSM-Micro LD Quick Start Manual - Page 5
Browse online or download pdf Quick Start Manual for Control Unit Dial2Open GSM-Micro LD. Dial2Open GSM-Micro LD 7 pages. Gsm remote control unit
Print Page
To do this you send the following SMS Message to the unit.
#PWD123456#CSQ?
You will receive a confirmation SMS based on a signal strength of 3.99
to 32.99
You will not require an external aerial with a signal strength above 6.99.
Changing Password
To change the password from
123456
to
121212
You would send the unit the following SMS text message.
#PWD123456#CAP121212#CAP121212
The unit will reply with the SMS text message
#PWD_OK
to indicate a correct command or
#PWD_Err
if a mistake has been made.
NEVER!!! Reveal your password to anybody. It is as valuable as
your bank pin number.
From this point on we will assume the password is 121212
Adding Authorised Numbers to the white list
The unit uses a white list of phone numbers from 01 to 64. It is
advisable to keep a record of the white list.
If you wanted to add the phone number
0781987654
To position 01 in the white list you would use the command
#PWD121212#WHL01=0781987654
You will receive a confirmation SMS message.