Dialight SafeSite Operation & Installation Instructions - Page 5

Browse online or download pdf Operation & Installation Instructions for Lighting Equipment Dialight SafeSite. Dialight SafeSite 6 pages. Area light with battery backup

Print Page

6. Close battery cover by tightening six 10-32 captive screws as shown to 28-30 in-lbs.

NOTE: When closing, be sure no wires interfere with closure to avoid risk of pinching.

Battery Backup Function

Battery Backup Indicator Light Functions

LED Indicator Status

Green ON and blinks every 10s

Red ON and blinks every 5s

Red LED Blinks every 2s

RED LED Blinks every 1s

Green LED Blinks every 2s

Green LED blinks every 1s

*Function Test – Tests for the basic functionality of battery and light output connections

*Duration/Commissioning Test – Tests for full duration of light output in battery backup mode.

Technical Data

Area Light Battery Backup

Nominal AC Supply Voltage

120-277V AC, 50-60Hz, Single Phase

Power Consumption

[Lumens]

9000

7000 (Wide Optic)

7000

6000

4000

3000

Power Factor(AC only)

ATHD(AC only)

<10% @120VAC

<10% @230/240VAC

<12% @277VAC

Temperature

-4°F to +131°F [-20°C to +55°C]

Page

Area Light with Battery Backup UL1598/A / UL844 / UL924

Technical Data

Area Light Battery Backup (cont.)

Housing Material

A360 Die Cast Aluminum

Finish

[W]

Powder Coat

Gray, RAL 7040

Lens

Polycarbonate or glass

Dimensions

Conduit Mount option

>0.95

10.7 x 12.2 x 8.1 in.

[271 x 311 x 205 mm]

All other mounting options

Size varies by mount type

Status/Mode

System OK/AC OK

Battery not detected/Faulty, Check connections/Replace Battery

Light Output Fault. Check wiring connections

Multiple faults

Performing Function Test*

Performing Duration Test/Commissioning Test*

Dialight, 1501 Route 34 South, Farmingdale, NJ, USA 07727

Tel: 732 919 3119

9100HZC280501 REV B

Fax: 732 751 5778