Dialighting IW108-RGBW User Manual - Page 6

Browse online or download pdf User Manual for Light Fixture Dialighting IW108-RGBW. Dialighting IW108-RGBW 6 pages. 324w led moving head wash

Print Page

5. DMX-512 control connections

Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the

male 3-pin XLR input of the moving head. You can chain multiple

Moving head together through serial linking. The cable needed should be two core, screened cable with

XLR input and output connectors. Please refer to the diagram below.

Address 26

Address13

DMX-512 connection with DMX terminator

For installations where the DMX cable has to run a long distance or is in an electrically noisy environment,

such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption

of the digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω

resistor connected between pins 2 and 3,which is then plugged into the output XLR socket of the last

fixture in the chain. Please see illustrations below.

120Ω

Address 1

PIN 3

PIN 2

The display will close after 30 seconds without operations.