ALLOWANCE 100 User Manual - Page 13

Browse online or download pdf User Manual for Controller ALLOWANCE 100. ALLOWANCE 100 15 pages. Television time manager

Print Page

The beginning time and ending times of any time interval must always be within one day of each other (no

interval may span "12:00" midnight). Otherwise the Error Tone will sound and the ending time will blink giving

you a chance to set it correctly.

Once the day range and the time range of the Lock Out Interval has been set the display flashes "C" indicating

that the child numbers that this interval is to apply to must be entered.

Some of the digits 1, 2, 3, and 4 can now be entered followed by the ENTER key. This completes the setup of a

lockout interval.

The display reverts to blinking "Lo" indicating that the interval setting feature can be ended (by pressing

ENTER or CLEAR) or another interval may be entered.

As a example suppose all three time intervals are to be set. The first time interval is to be from 3:30pm through

5:30pm for Monday through Friday. The second time interval is to be from 10:00pm to midnight. The third time

interval is to be from midnight to 5:00am. the keystrokes to set these three intervals are indicated below. Assume

also that each time interval is to apply to only child number 1 and child number 4.

Key(s) Pressed

LOOK FORCE

1 ENTER

5 ENTER

330 ENTER

CLEAR ENTER

530 ENTER

14 ENTER

2 ENTER

1 ENTER

7 ENTER

1000 ENTER

CLEAR ENTER

1159 ENTER

14 ENTER

3 ENTER

Action Taken

The display first blinks "L" when the LOOK key is pressed then

blinks "Lo" when the FORCE key is pressed.

The display blinks "Lo" and "1" until the ENTER key is pressed

and then blinks "dAy" and "0".

The display blinks "dAy" and "1" until the ENTER key is pressed

then blinks "EdAy" and "5" until the ENTER key is pressed for the

second time. The display then blinks "12:00".

3:30 is set for the starting time of range 2 and the display blinks

"3:30 AM" and waits for ENTER to set the AM LED (or CLEAR

ENTER to turn off the AM LED).

3:30 PM is set for the start time and the display blinks "12:00" and

waits for the ending time.

5:30 pm is set for the end time of the interval and the display blinks

"C" and waits for the child numbers that are to be affected by this

range to be entered. Note: 5:30 and the AM LED will not blink.

5:30 must be in the PM since no lockout interval may span

midnight.

Sets child 1 and child 4 as being affected by this interval. The

display blinks "Lo" and waits for one of the digits 1, 2, or 3.

Interval two is selected for modification. The display blinks "dAy"

and waits for one of the digits 0 through 7.

Monday through Sunday (all week) is set for the starting and

ending days of the interval. The display blinks "12:00" and waits

for the starting time.

10:00 is set for the starting time and the display blinks "10:00 AM"

and waits for ENTER to set (or CLEAR) the AM LED.

10:00 is set for the start time and the display blinks "12:00" and

waits for the ending time.

11:59 PM is set for the end time and the display blinks "C" and

waits for the child numbers that are to be affected by this interval.

Sets the 1 and child 4 as being effected by this interval. The display

blinks "Lo" and waits for one of the digits 1, 2, or 3.

Interval three is selected for modification and the display blinks

"dAy" and waits for one of the digits 1-7 to be entered.