Alloy POEFE8TV3 User Manual - Page 4

Browse online or download pdf User Manual for Network Router Alloy POEFE8TV3. Alloy POEFE8TV3 13 pages. Fast ethernet poe+ unmanaged switch

Print Page

according to IEC 61000-4-11:2004

LVD:

- EN60950-1:2006+A11:2009+A1:2010EMC:

Australian C-Tick Compliance.

This equipment is compliant with the required Australian C-Tick standards

PLEASE READ THE FOLLOWING SAFETY INFORMATION CAREFULLY BEFORE INSTALLING THE

SWITCH:

WARNING: Installation and removal of the unit must be carried out by qualified personnel

only.



This guide is intended for use by network administrators who are responsible for

setting up and installing network equipment; consequently it assumes a basic

working knowledge of LANs (Local Area Networks).



The unit must be connected to an earthed (grounded) outlet to comply with

international safety standards.



Do not connect unit to an A.C outlet (power supply) without an earth (ground)

connection.



The appliance coupler (the connector to the unit and not the wall plug) must have a

configuration for mating with an EN 60320/IEC 320 appliance inlet.



The socket outlet must be near to the unit and easily accessible. You can only

remove power from the unit by disconnecting the power cord from the outlet.



This unit operates under SELV (Safety Extra Low Voltage) conditions according to IEC

60950. The conditions are only maintained if the equipment to which it is connected

also operates under SELV conditions.

POEFE8TV3 User Manual