Dialogic D/120JCT-LS Specifications - Page 2
Browse online or download pdf Specifications for PCI Card Dialogic D/120JCT-LS. Dialogic D/120JCT-LS 8 pages. Jct media boards
Print PageDialogic
D/120JCT-LS Media Board
®
Technical Specifications
Number of ports
Maximum boards per system
CT Bus loads per board
Maximum CT Bus loads per system
Analog network interface
Resource sharing bus
Control microprocessor
Digital signal processor
Supported operating systems
CSP
FAX
Signaling
Host Interface — PCI
Bus compatibility
Bus speed
Bus mode
Shared memory
Interrupt level
I/O ports
Platform — PCI
Form factor
Power Requirements — PCI
+5 VDC
+12 VDC
–12 VDC
Host Interface — PCI Express
Bus compatibility
Bus speed
Bus mode
Shared memory
Interrupt level
I/O ports
12
8 (Linux and Windows). Number may be limited by application and system performance
1
20
On-board loop start interface (12)
CT Bus
Intel 80486 GXSF running at 32.768 MHz with 2 MB SDRAM
Freescale DSP56303 @ 100 MHz, with 128Kx24 private SRAM
Linux: Dialogic
System Release 6.1 SU; Windows: Dialogic
®
Guide to Dialogic System Software, Operating Systems, and Dialogic Products
Yes
Yes
Analog loop start
Complies with PCI-SIG Bus Specification, Rev. 2.2
33 MHz maximum
32-bit
32 KB to 64 KB page
1 IRQ (INTA) shared by Dialogic
®
JCT Media Boards, including Dialogic
D/4PCIU4S Media Board models
None
Universal slot (5 V or 3.3 V) PCI long card
12.28 in. (31.2 cm) long
4.2 in. (10.67 cm) high
1.2 A typical; 1.4 A maximum
235 mA typical; 285 mA maximum
80 mA typical; 100 mA maximum
Complies with PCI-SIG PCI Express Base Specification, Rev. 1.1
2.5 GHz maximum per direction
x1 lane configuration (x1 or higher compatible)
32 KB to 64 KB page
1 IRQ (INTA) shared by Dialogic
JCT Media Boards, including Dialogic
®
D/4PCIU4S Media Board models
None
2
Datasheet
JCT Media Boards
System Release 6.0 SU. Details at
®
®
D/4PCIUF and
D/4PCIUF and
®