Dialogic DM/IP601-CPCI-100BT Quick Install Card - Page 2

Browse online or download pdf Quick Install Card for Network Hardware Dialogic DM/IP601-CPCI-100BT. Dialogic DM/IP601-CPCI-100BT 2 pages. Ip board

Print Page

are installing.

8. If the power to the chassis was turned OFF in step 1,

turn the power to the chassis ON.

Connecting External Cables

Connect an Ethernet cable to the Ethernet Interface

Connector on the Rear I/O module.

100BASE-TX Ethernet Connector Pinouts

NOTE: Connectors for Trunks 1 to 4 (J1 to J4 or the BNC

connectors on the Rear I/O module) are not functional in

this board.

L i n k

P i n 1

S t a t u s

I n d i c a t o r

( G r e e n )

Removing the Board

Exercise caution when removing the board from a cPCI

chassis. The board extractors are equipped with red locking

tabs that lock when the board is correctly positioned in the

chassis.

CAUTION

When removing the board, if the red locking tabs on the

extractors are not pressed while applying pressure to the

extractors, there is a risk of breaking the tabs.

To remove the board from the chassis, simultaneously press

down both red locking tabs (see the figure below) on the

extractors before applying pressure away from the center of

the board to release the board from the chassis.

P r e s s

a n d

h o l d

d o w n

t h e

r e d

l o c k i n g

t a b s

o n

b o t h

b o a r d

e x t r a c t o r s

b e f o r e

a p p l y i n g

p r e s s u r e

t o

t h e

b o a r d

e x t r a c t o r s

Removing the

Rear I/O Module

NOTE: In a live insertion (powered-on) system, do not

remove and replace a Rear I/O module while the main

(front) board is in service. Remove the front board first,

then remove and replace the Rear I/O module, and then

reinsert the front board. Remove the Rear I/O module using

the red locking tabs as described above.

After Installing the

After installing the hardware, proceed with the software

installation as described in the instructions included with

the Dialogic

For technical specifications and product information go to:

http://www.dialogic.com/products.htm.

Warranty and Return

P i n

L a b e l

R D +

R D -

T D +

N C

T D -

N C

For specific warranty information for this board, refer to the

N C

Warranty section of the Products page, located at this URL:

http://www.dialogic.com/warranties/.

Contacting Technical Support

Dialogic provides technical support for its products through

a network of value added distributors who are trained to

answer technical questions on installing and configuring

Dialogic

products. If you are unsure how

to contact your support channel, please call Dialogic

in the United States at 973-967-6600 (9am-5pm EST)

and we will assist in obtaining the appropriate support

channel. Outside the United States please refer to

http://www.dialogic.com/support/contact

local contact information.

Dialogic also provides direct support via Dialogic

Services agreements. For more details of direct support

from Dialogic please refer to:

http://www.dialogic.com/support/DialogicPro.

To return a board for warranty repair or any other returns,

please refer to: http://www.dialogic.com/support/hwfaults

Sales Assistance

If you have a sales question, please contact your

local Sales Representative or the Regional Sales Office

for your area. Address, telephone and fax numbers, are

available at the Dialogic website located at:

http://www.dialogic.com/contact.htm.

To purchase Dialogic

following website to locate the appropriate supplier.

http://www.dialogic.com/purchase.htm.

Hardware

System Software.

Information

Warranty Period

to obtain

Pro™

Returning a Product

products, please refer to the

All contents of this document are furnished for informational use only and

are subject to change without notice and do not represent a commitment on

the part of Dialogic Corporation or its subsidiaries ("Dialogic"). Reasonable

effort is made to ensure the accuracy of the information contained in the

document. However, Dialogic does not warrant the accuracy of this

information and cannot accept responsibility for errors, inaccuracies or

omissions that may be contained in this document.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION

WITH DIALOGIC

PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED,

BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL

PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS

PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND

DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER,

AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC

PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING

TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY,

OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF

A THIRD PARTY.

Dialogic products are not intended for use in medical, life saving, life

sustaining, critical control or safety systems, or in nuclear facility

applications.

It is possible that the use or implementation of any one of the concepts,

applications, or ideas described in this document, in marketing collateral

produced by or on web pages maintained by Dialogic may infringe one or

more patents or other intellectual property rights owned by third parties.

Dialogic does not provide any intellectual property licenses with the sale of

Dialogic products other than a license to use such product in accordance with

intellectual property owned or validly licensed by Dialogic and no such

licenses are provided except pursuant to a signed agreement with Dialogic.

More detailed information about such intellectual property is available from

Dialogic's legal department at 9800 Cavendish Blvd., 5

Quebec, Canada H4M 2V9. Dialogic encourages all users of its products

to procure all necessary intellectual property licenses required to

implement any concepts or applications and does not condone or

encourage any intellectual property infringement and disclaims any

responsibility related thereto. These intellectual property licenses may

differ from country to country and it is the responsibility of those who

develop the concepts or applications to be aware of and comply with

different national license requirements.

Dialogic, Diva, Eicon, Eicon Networks, Eiconcard, Dialogic Pro and

SIPcontrol, among others, are either registered trademarks or trademarks of

Dialogic. Dialogic's trademarks may be used publicly only with permission

from Dialogic. Such permission may only be granted by Dialogic's legal

department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada

H4M 2V9. Any authorized use of Dialogic's trademarks will be subject to

full respect of the trademark guidelines published by Dialogic from time to

time and any use of Dialogic's trademarks requires proper

acknowledgement. The names of actual companies and products mentioned

herein are the trademarks of their respective owners.

Floor, Montreal,