Diamant Steam pressure cleaner with Iron User Instructions - Page 7

Browse online or download pdf User Instructions for Steam Cleaner Diamant Steam pressure cleaner with Iron. Diamant Steam pressure cleaner with Iron 9 pages.

Print Page

Depending on the quality, rugs and carpets should be cleaned carefully with very little

steam and then brushed with a clean, dry cloth over the brush attachment.

Cloth carpets, mattresses and bed frames can be cleaned and disinfected in the same way

(house mites, germs, bacteria).

Cleaning of sealed parquet and marble floors

Firmly attach a triple-folded dry wipe cloth to the cleaning brushes and wipe evenly.

Cleaning of walls, ceilings and high glass panes

Extend the tubes according to the height of the room and insert the large cleaning brush

with covering.

Important: Change the cloth when it gets dirty.

Be careful with water-soluble colours!

TRIANGULAR BRUSH (optional 12)

The triangular brush is used wherever working with the large brushes is laborious and

impossible due to lack of room.

Special applications:

• Furniture covers and car seats (not leather)

Cover the triangular brush with a clean, dry cloth and fasten it tight. Treat stubborn stains

carefully with the spray gun. Spray steam from a distance of about 10 cm away, and dab

with a clean, dry cloth or carefully rub dry.

• Textiles

Clothing, blankets, curtains, mattresses and upholstery can not only be cleaned, but freshened

up as well. Cover the triangular brush with a cloth as described above and brush down the texti-

les lightly, or steam evenly from a short distance away. The steam penetrates and relaxes the

fibres, restoring the shape of the fabric.

Important: With textiles of any kind, always follow the manufacturer instructions

and/or test for colour fastness on an inconspicuous part of the fabric.

GETTING STARTED

Steam cleaner

• Push filler cap (1) downwards, then twist left and

screw open.

• Fill tank with as much water as possible (maximum

filling quantity 2 litres). Use only mains water .

Do not use distilled water.

• Press filler cap downwards, then twist right and

screw shut.

• Connect mains cable to the socket.

• Turn on main switch (4). Diode lights up: device is

heating up. As soon as the green control lamp

light on the pressure indicator (6) lights up, the

device is ready for operation.

• Connect hose with spray gun (18). Be sure that the

coupler plug is correctly engaged!

• When device is ready for operation, turn on the

steam supply line switch (3).

• Screw the steam regulator (8) open and adjust

according to the application.