DiamaPro Systems SVX2-A Owner's Manual - Page 3

Browse online or download pdf Owner's Manual for Vacuum Cleaner DiamaPro Systems SVX2-A. DiamaPro Systems SVX2-A 8 pages. Industrial vacuum

Print Page

• Make sure that the power cable has no wear or damage. If replacing the

cable, always replace it with another of the same specifications as the orig-

inal one: cables that are not approved or of inferior quality may overheat

and cause serious injury to the user

• Make sure that the machine is connected to an appropriate power source

in full working order (check the presence of a fully functional grounding

socket)

• Repairs must only be carried out by authorized personnel and only when

the machine is turned off and disconnected from the power source

• Never allow unauthorized personnel to use the machine

• Make sure that all safety devices are in full working order before turning

on the machine

• Never cover the vacuum cleaner during use

7. INSTALLATION

7.1 DELIVERY AND HANDLING

All machines are carefully tested and checked by DiamaPro before

delivery. The machine is transported inside a protective box or wrapped

in a protective film that allows the courier to see the item during transport

and is securely fixed to a pallet. If any part of the machine is not intact or

has been damaged during transport, file an immediate complaint with the

courier. Parts that have been damaged or broken due to incorrect transport

or handling of the machine will not be recognized by the manufacturer's

warranty. The machine must be lifted and moved using a forklift truck in

accordance with the relevant safety regulations in force in the workplace

7.2 CHECK THE PROPER ELECTRICAL

CONNECTION

Connect the industrial plug to the power cable and connect the plug to a

socket that has the same amp rating and is protected by a line-isolating

switch; in the case of the three-phase vacuum cleaner, it is necessary to

check before use that the motor rotates in the correct direction (clockwise)

as shown by the die-cast indicator on the turbine; if rotation occurs in an

anti-clockwise direction, it is necessary to disconnect the machine from

the power source, invert one of the three phase cables inside the plug and

check again for correct rotation

8. PERIODICAL MAINTENANCE

Maintenance and cleaning operations must ALWAYS be carried out when

the vacuum is turned off and disconnected from the power source. No

particular measures must be taken for the maintenance, cleaning or lubri-

cation of the suction unit. However, it is important to remember that correct

use and servicing are essential if the safety and efficiency of the vacuum

are to be guaranteed.

To ensure regular and constant operation and to prevent the warranty from

becoming void, always use genuine DiamaPro spare parts when repairs

are needed.

8.1 BEFORE TURNING ON AND TURNING OFF

EVERY DAY

• Visually check that the suction hose has not been damaged in any way (it

must not be damaged, torn, crushed)

• Check that the electrical switches are in full working order and are not

damaged in any way

• Check the level of waste inside the main barrel N.B. Empty the main

barrel if you are using an DiamaPro model empty the main barrel

• Check that the suction hose has not been damaged in any way

• Check that the motor head is correctly positioned on the filter chamber

and that the latter is correctly placed on the main barrel

• If the vacuum cleaner is moved, ensure that the power voltage of the play

in this new location corresponds to the one on the technical data plate

8.2 AT EVERY 200 HOURS OF OPERATION

• Check the condition of the primary filter: it must not have tears, holes or

other damage: in this case replace it (see 14.)

• Check that the technical data plate is legible and not damaged in any

way: contact the manufacturer for a replacement if necessary

PERFORM THE FOLLOWING OPERATIONS AT

EVERY 10 HOURS OF OPERATION IF THE VACUUM

CLEANER IS AN DIAMAPRO MODEL

9. PRODUCT DISPOSAL

Dispose of the machine and any accessories according to the legislation of

the country. To avoid affecting the environment or your health or the health

of others it is recommended to separate the machine from other waste,

and if necessary properly recycle it.

10. TECHNICAL DATA

MODEL

CODE

CERTIFICATE

MOTORS

VOLTAGE

FILTER CLEANING

FILTRATION CLASS

USEFUL CAPACITY

CFM*

WATERLIFT

DIMENSIONS

INLET DIMENSION

TANK DIAMETER

WEIGHT

SOUND PRESSURE LEVEL (ISO 11201)

SVX2A

110V-60HZ

110V-60 HZ

AUTOMATIC

HEPA

INFINITY BAGS

220

88 IN

31X25X54IN

2 IN

18 IN

218 LBS

<78

*Theoretical