Miller 300459001 Owner's Manual - Page 2

Browse online or download pdf Owner's Manual for Welding System Miller 300459001. Miller 300459001 17 pages.

Important Information Regarding CE Products (Sold Within The EU)

This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.

This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public

access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.

Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding

circuit may not be a major contributor to the EMF. See the Owner's Manuals for all components of the welding circuit for additional EMF exposure

information.

The EMF assessment on this equipment was conducted at 0.5 meter.

At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.

Specifications

The serial number and rating information for this product is located on the back panel. Use rating label to determine input power requirements and/or

rated output. For future reference, write serial number in space provided on cover of this manual.

Notes

OM-235 464 Page 2

Recirculating Coolant System For Water-Cooled GTAW Torches And GMAW Guns

Used Primarily With Maxstar 200, Dynasty 200, And Syncrowave 200 Models

IP Rating: 23 − Not Intended For Use In Heavy Rain, Or Near Splashing Water

1 gal (3.8 L) Coolant System Capacity

Max Cooling Capacity: 9700 BTU/hr (2850 Watts) @ 1.7 L/min

IEC Cooling Capacity: 4120 BTU/hr (1210 Watts) @ 1L/min

IEC Cooling Capacity states that the water inlet temperature can not exceed 40 C above ambient temperat-

ure at a 1L/min flow rate. Ratings Developed At An Ambient Temperature Of 68 F to 77 F

(20 C To 25 C). Operating Temperature Is 14 F To 104 F (−10 C To 40 C)

Max Welding Amperage Rating: 200 amps @ 40% duty cycle, 175 amps @ 60% duty cycle, 150 amps @

100% duty cycle.

Dimensions: 23-3/4 in. (603 mm) Long, 7-1/2 in. (191 mm) Wide, 8 in. (203 mm) High

Weight: 25 lb (11 kg)

805 188-A

115 Volt Models Use 2.1 Amperes, 60 Hertz, Single-Phase Input Power; 230 Volt Models Use 0.65 Am-

peres, 50/60 Hertz, Single-Phase Input Power