Miller Axcess 300 Owner's Manual - Page 19

Browse online or download pdf Owner's Manual for Welding System Miller Axcess 300. Miller Axcess 300 44 pages. Arc welding power source and wire feeder with meters
Also for Miller Axcess 300: Owner's Manual (36 pages), Owner's Manual (48 pages)

Print Page
Miller Axcess 300 Owner's Manual

3-13. Threading Welding Wire

1
Open pressure assembly.
Close and tighten pressure
assembly, and let go of wire.
Press gun trigger until wire
comes out of gun. Reinstall
contact tip and nozzle
3
5
2
6
.
Hold wire tightly to keep it
from unraveling.
(150 mm)
Pull and hold wire; cut off end.
.
Use pressure indicator
Tighten
scale to set a desired
drive roll pressure.
Pressure
1
Indicator
2
3
Scale
4
Remove gun nozzle and contact tip.
WOOD
Feed wire to check drive roll pressure.
Tighten knob enough to prevent slipping.
4
7
6 in
Push wire thru guides into gun;
continue to hold wire.
Tighten
1
2
3
4
1
Wire Spool
2
Welding Wire
3
Inlet Wire Guide
4
Pressure Adjustment Knob
5
Drive Roll
6
Outlet Wire Guide
7
Gun Conduit Cable
Lay gun cable out straight.
Tools Needed:
Turn On.
Cut off wire. Close
and latch door.
Ref. 802 517-A / 802 475 / S-0627-A
OM-1321 Page 15