Miller BOC Migmatic 250 Owner's Manual - Page 14

Browse online or download pdf Owner's Manual for Welding System Miller BOC Migmatic 250. Miller BOC Migmatic 250 32 pages.

Print Page

2-12. Threading Welding Wire

1
Open pressure assembly.
Close and tighten pressure
assembly, and let go of wire.
Press gun trigger until wire
comes out of gun. Reinstall
contact tip and nozzle
OM-1308 Page 10
2
3
5
6
.
(150 mm)
Pull and hold wire; cut off end.
Tighten
Remove gun nozzle and contact tip.
WOOD
Feed wire to check drive roll pressure.
Tighten knob enough to prevent slipping.
4
7
Hold wire tightly to keep it
from unraveling.
6 in
Push wire thru guides into gun;
continue to hold wire.
Ref. ST-148 261-C / ST-159 218-B / ST-801 083 / S-0627-A
1
Wire Spool
2
Welding Wire
3
Inlet Wire Guide
4
Pressure Adjustment Knob
5
Drive Roll
6
Outlet Wire Guide
7
Gun Conduit Cable
Lay gun cable out straight.
Tools Needed:
4 in
(102 mm)
Turn On.
Cut off wire. Close
and latch door.