Miller CST 280 Owner's Manual - Page 14
Browse online or download pdf Owner's Manual for Welding System Miller CST 280. Miller CST 280 28 pages. Dual rack kit
Also for Miller CST 280: Owner's Manual (48 pages)
Print Page
3-4. Control Box Setup
2
3
2-3/8 in
(60.3 mm)
OM-213 592 Page 10
1
Hole Location
Use knock-out punch to add
a 2-7/16 in (62 mm) dia.
hole for 2 in stain relief
3-1/4 in
(82.6 mm)
Have only qualified persons make
this installation.
Y Turn Off and disconnect
1
2
Remove snap-in blank from control
box.
If control box does not have the
hole with snap-in blank, a hole must
be made according to the hole
location drawing.
3
Install supplied strain relief into
control box hole. Be sure that
clamp screw heads face front of
rack, and clamp is loose for
installing power cable.
Tools Needed:
input power.
Control Box
Snap-In Blank
Strain Relief
803 529-A / 803 530-A