Miller CST 280 VRD International Owner's Manual - Page 23
Browse online or download pdf Owner's Manual for Welding System Miller CST 280 VRD International. Miller CST 280 VRD International 48 pages. Arc welding power source
Print Page
3-12. Selecting 208 - 230 Volts AC Single/Three Phase Input Voltage
Tools Needed:
208-230/400-460 Volts Model
208−230
400−460
VAC
VAC
220-230/460-575 Volts Model
220−230
460−575
VAC
VAC
Y Turn Off welding power
source,
input
proceeding.
Check input voltage available at
site.
1
1
Switch Cover
2
Voltage Selection Switch
The input voltage that the power
source is linked for is labeled next to
the switch.
Check voltage selected on unit.
Changing
necessary if selected value does
not match available input voltage.
2
Y Do not switch under load.
To
position, open switch cover and
turn switch to the required voltage
range.
.
The switch has an off position
at 905 straight up.
Be sure that switch is turned
completely to its detent position.
1
2
and
disconnect
power
before
selection
is
only
change
selection
switch
Ref. 803 945-A / Ref. 803 946-A
OM-217 655 Page 19