Miller DIVERSION 180 w/Auto-Line Owner's Manual - Page 21
Browse online or download pdf Owner's Manual for Welding System Miller DIVERSION 180 w/Auto-Line. Miller DIVERSION 180 w/Auto-Line 40 pages. Wp - 17 torch
Also for Miller DIVERSION 180 w/Auto-Line: Owner's Manual (48 pages)
Print Page
5-8. Connecting 115 Volts Input Power For Diversion 180 Models
.
A complete Parts List is available at www.MillerWelds.com
!
Installation must meet all National and Local Codes
− have only qualified persons make this installation.
!
Special installation may be required where gasoline or
volatile liquids are present − see NEC Article 511 or CEC
Section 20.
.
The Auto-Line circuitry in this unit automatically links the
power source to the primary voltage being applied, either
115 or 230 VAC.
For 115 volts AC input power, a 15 or 20 ampere individual
branch circuit protected by time-delay fuses or circuit breaker is
required.
1
Multi-Voltage Plug And Power Cord Connector (NEMA
Type 5−15P Plug Shown)
For multi−voltage plug connections, see Section 5-10.
2
Receptacle − NEMA Type 5−15R (Customer Supplied)
1
2
Input 6 2011-03 Ref. 805474-B
OM-263920 Page 17