Diametral AC250K1D-S Manual - Page 6

Browse online or download pdf Manual for Power Supply Diametral AC250K1D-S. Diametral AC250K1D-S 12 pages. Ac power supply

Print Page
V.III. Stabilization (only the model AC250K1D-S and AC250K2D-S)
V.III.I. Switching-on of the stabilization, saving of the last voltage value, output
characteristics mode
V.III.I.I. Data definition
StA
Stabilization
Tolerance of the stabilisation in the range of 1 ÷ 9V (hysteresis)
tOL
SL
Save Last - save of the last pre-set voltage value
OUT
Output
COd
Code (password) - password for the special functions, preset value from the
Value – the highest allowed voltage value, which could be set in the range of 1 ÷
VAL
Change password – serves for change of the 4-figures password for special
CHP
New – new 4-figures password
nEW
Reenter – confirmation of the new 4-figures password
rEE
V.III.I.II. Setup of the individual parameters in the menu
Display SET (3) displays the name of function; display REAL (8) displays the preset
value.
- 6 -
YES:
yes, stabilization is switched ON
nO:
no, stabilization is switched OFF
YES:
yes, the last set voltage value will be used as the basic value
when switching-on the source again
nO:
no, the value voltage will be set to the basic value OV when
switching-on the source again
YES:
yes, the output will be switched ONN/OFF during the new
switching-on the source according to the last output status
before switching-off the source
nO:
no, the output will be switched-off during the new switching-on
the source
production is 1234
ACC:
password is accepted
Err:
password is not accepted
255V
functions
YES:
yes, the password can be changed
nO:
no, the password cannot be changed
ACC:
password is accepted
Err:
password is not accepted