Aquant BWT Series Installation Manual - Page 6

Browse online or download pdf Installation Manual for Water Filtration Systems Aquant BWT Series. Aquant BWT Series 14 pages. Top-mount sand-filter for swimming pool

Print Page

3.- In case of a filter with top valve, install the

selector valve on top of the filter with the clamp. Make sure that the joint

between the valve and the filter are correctly placed.

4.- Perform the three connections of the selector valve: pump piping to the

valve, valve to the waste drain and valve to the pool return. Each of these

three outlets is clearly identified on the valve.

5.- Set the gasket, the valve, the clamp and the manometer (see exploded

view). It is not necessary to use teflon tape, as the watertightness is

guaranteed in this case by the joint. Do not tighten the manometer with a

tool, as manually will be sufficient.

SAND LOAD

In order to obtain maximum efficiency from your filter, it should be filled with

silica sand with a grain size classification of 16 / 32 inches. With the quantity

indicated on the plate specifying the characteristics, proceed as follows:

First, fix the

gasket

Last, place the

clamp

ENGLISH

Then, position

the valve

Fix the pressure

gauge